A thin layer of impermeable material, typically polyethylene sheeting, included in building construction to prevent moisture from damaging the fabric of the building.

EnergyGuard™ Polyiso Insulation board is made of glass fiber-reinforced cellulosic felt facers bonded to a core of isocyanurate foam.

---

GenFlex GL ISO flat and tapered roof insulation consists of a closed-cell polyiso foam core laminated to a black glass reinforced mat facer on both major surfaces.

---

Polytherm is a highly energy efficient rigid insulation board composed of a closed-cell Polyisocyanurate foam core laminated to a fiber reinforced black non-asphaltic organic facer for superior bonding characteristics.

---

Fastener & Insulation Plates are used with Insulation Fasteners to anchor down roof insulation.

For bituminous waterproofing products, including production of roofing felt and for sealing flat roofs.

Protection Board is a continuously extruded flexible twin wall board made of polypropylene copolymer. Protection Board provides protection for all types of waterproofing membranes. Protection Board is used as protection of waterproofing membranes against possible damage during backfilling on a wide variety of applications such as foundation walls, roof decks, terraces, planters, promenades, etc.

Imperial Asphalt Saturated Felt is composed of a resilient, high-strength cellulose fiber mat, saturated with premium waterproofing bitumen. The product may be used as a hot mopped asphalt vapor retarder on certain substrates or as a membrane for multi-ply BUR systems.

Type 6 Glass Ply Sheet Asphalt Saturated Fiberglass Mat is composed of a high-strength inorganic, non-woven fiberglass mat, which has been thoroughly permeated with premium asphalt. Offering greater moisture resistance than a conventional four-ply organic felt built-up roofing system, this sheet’s surface is sanded to prevent sticking in the roll. Type 6 Glass Ply Sheet also offers superior “breaking strength” characteristics in both longitudinal and transverse directions, thereby enabling a four-ply application to provide even greater performance characteristics.

Cant Strips are used for making smooth transitions from the roof deck surface terminating on a wall and/or parapet wall.

930-38 is a non-flammable adhesive designed for use with self-adhered SBS modified bitumen base sheets. The risk of primer flare-up is eliminated when modified bitumen cap sheets are thermofused to the self-adhered base sheet. 930-38 is used as a non-flammable adhesive in roofing applications for self-adhered SBS modified bitumen membranes such as modifiedPLUS NP180 Tack Sheet, and G100 Tack Sheet.

modifiedPLUS NP180 Base Sheets are designed for use as the base or first ply in a high performance two-ply modified bitumen roofing system, or as a ply in two-ply Protected Membrane roofing system. Additionally, it can be used as a reinforcing sheet in 790-11 Hot Applied Rubberized Asphalt Systems.

Termination Bar is intended for attaching and sealing flashing termination.

Universal Single-Ply Sealant is a 100% solids, solvent-free, one-part, polyether sealant that provides a weather tight seal to a variety of building substrates.

A layer of gravel, or small stones, is applied on top of the final coating of asphalt to protect the roof from the elements, including ultraviolet (UV) rays and hail. … Although commonly called “gravel,” the top layer is usually some sort of aggregate material (such as pea gravel, slag or mineral granules).

Usually composed of metal, used to cover or shield the upper edges of the membrane base flashing; wall flashing can also be used to cover the top of various building components, such as parapets or columns.

A thin layer of impermeable material, typically polyethylene sheeting, included in building construction to prevent moisture from damaging the fabric of the building.

Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to inorganic coated glass facers. ACFoam-III is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm x 2440mm) and 4ft x 4ft (1220mm x 1220mm) panels. Manufactured in accordance with ASTM C1289, Type II, Class 2, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3.

Fastener & Insulation Plates are used with Insulation Fasteners to anchor down roof insulation.

Thermostik® is used for bonding insulation boards such as polyisocyanurate, fibrous glass or mineral fibre to steel, wood, gypsum board or concrete in the construction of roof decks as well as to modified bitumen membrane air/vapor barriers, kraft vapor barrier, asphalt built-up vapor barriers, and Blueskin® Air/vapor Barriers. It also can be used for laminating insulation panels to one another and for adhering fibreboard or Re-Cover Board panels to the insulation. Thermostik® 880-33 is compatible with and can be used to adhere insulation or fibreboard panels to aged asphalt or coal tar roofs.

Protection Board is a continuously extruded flexible twin wall board made of polypropylene copolymer. Protection Board provides protection for all types of waterproofing membranes. Protection Board is used as protection of waterproofing membranes against possible damage during backfilling on a wide variety of applications such as foundation walls, roof decks, terraces, planters, promenades, etc.

For bituminous waterproofing products, including production of roofing felt and for sealing flat roofs.

Elastoflex V is a high quality, fiberglass reinforced, SBS (Styrene-Butadiene-Styrene) modified bitumen roofing membrane. Elastoflex V is specially designed with a sand surface and either a sand back (for hot mop or cold process applications) or with a polyethylene burn-off film (for heat weld applications). Reinforced with a superior fiberglass mat, the Elastoflex V exhibits exceptional dimensional stability and puncture resistance.

Elastoflex S6G membranes are high quality elastomeric, SBS (Styrene-Butadiene-Styrene) modified asphalt roofing membranes reinforced with a non-woven 250 gram polyester mat. The Elastoflex S6 G, is available with either Polyethylene burn off film for heat welded applications, or sand backed for hot mop or cold adhesive. With superior reinforcement and proprietary formulation, this granulated cap sheet exhibits exceptional tensile strength, puncture resistance, and dimensional stability. The granulated surface, provides long term UV protection. The Elastoflex S6 G membranes meet, or exceed, the requirements for ASTM D-6164 Type II, are listed by UL and can be used as part of a Polyglass warranted roof assembly.

The surfacing layer of bitumen into which aggregate is embedded on an aggregate-surfaced built-up roof.

Pea Gravel will help anchor the material underneath and lower the risk of it being blown off in high winds. As protection, the stones absorb some of the sun’s rays, preventing the roof material from becoming brittle over time.

Usually composed of metal, used to cover or shield the upper edges of the membrane base flashing; wall flashing can also be used to cover the top of various building components, such as parapets or columns.

Cant Strips are used for making smooth transitions from the roof deck surface terminating on a wall and/or parapet wall.

Aquatac Primer is a polymer emulsion based primer for self-adhesive membranes.

Vapor-Bloc® SA is a self-adhered vapor barrier membrane designed to be adhered directly to roof decks. Ideal application surfaces include steel decks, gypsum board and plywood or certain insulation panels prior to the application of finished roof coverings. The main function of Vapor-Bloc® SA is to serve as a full coverage vapor barrier and secondary waterproofing layer in the composition of roof assemblies.

Thermostik® is used for bonding insulation boards such as polyisocyanurate, fibrous glass or mineral fibre to steel, wood, gypsum board or concrete in the construction of roof decks as well as to modified bitumen membrane air/vapor barriers, kraft vapor barrier, asphalt built-up vapor barriers, and Blueskin® Air/vapor Barriers. It also can be used for laminating insulation panels to one another and for adhering fibreboard or Re-Cover Board panels to the insulation. Thermostik® 880-33 is compatible with and can be used to adhere insulation or fibreboard panels to aged asphalt or coal tar roofs.

Fastener & Insulation Plates are used with Insulation Fasteners to anchor down roof insulation.

EnergyGuard™ Polyiso Insulation board is made of glass fiber-reinforced cellulosic felt facers bonded to a core of isocyanurate foam.

---

GenFlex GL ISO flat and tapered roof insulation consists of a closed-cell polyiso foam core laminated to a black glass reinforced mat facer on both major surfaces.

---

Polytherm is a highly energy efficient rigid insulation board composed of a closed-cell Polyisocyanurate foam core laminated to a fiber reinforced black non-asphaltic organic facer for superior bonding characteristics.

---

Protection Board is a continuously extruded flexible twin wall board made of polypropylene copolymer. Protection Board provides protection for all types of waterproofing membranes. Protection Board is used as protection of waterproofing membranes against possible damage during backfilling on a wide variety of applications such as foundation walls, roof decks, terraces, planters, promenades, etc.

modifiedPLUS NP180 Base Sheets are designed for use as the base or first ply in a high performance two-ply modified bitumen roofing system, or as a ply in two-ply Protected Membrane roofing system. Additionally, it can be used as a reinforcing sheet in 790-11 Hot Applied Rubberized Asphalt Systems.

NP180p/p has a thermofusible poly upper and lower surface for torching to substrate and to receive torched on cap sheet.

modifiedPLUS® NP250 Cap Sheets are used as the top ply in a two-ply roofing system and as a flashing membrane for modified bitumen roofing, conventional built-up roofing and as a maintenance repair material.

NP250gT4 has a thermofusible poly lower surface for torching to substrate.